NAME: DFCZ Chemical Process Pump
| DFCZ Chemical Process Pump |
| Model |
DFCZ |
| Capacity |
6~1700m³/h, with 2980RPM, 2970RPM, 2950RPM,1485RPM,1460RPM, 1450RPM, 1420RPM, 1400RPM |
| Head |
3.1~140m |
| Permitting working pressure |
2.5Mpa |
| Medium Temperature |
Normal≤-80°C, equal to or higher than 175°C take special orders |
| Material |
Cast iron-HT200, HT250; SS304 |
| Motor |
380V, 415V, 660V; IP54, IP55; 50Hz, 60Hz |
| Quality control system |
ISO9001:2000, ISO14001,GB/T5656,GB/T5662(ISO5199/2858) |
| Main Application |
Mainly used in chemical,petrochemical industry,oil refineries,paper mils,pulp and paper industry and the suggar industry sectors or areas of the dilivery of the liquid medium. |
Export experince:
Over 12 year export experince.
Product Summarize:
DFCZ chemical process pump company in order to meet the special requirements in the process of chemical and chemical products , developed and designed according to the national standard GB/T5656 and GB/t5622(ISO199/2858) standards.
DFCZ chemical process pump is Single-stage Single-suction suspension horizontal structure.
Shanghai East pump manufacture :
Nantong East Pump Group manufacture:
Ordering instructions
Must provide order information:
The required pump model or user operating point
flow, head, NPSH, the nature of the medium and temperature parameters and special parameters of the basic requirement;
The pump main parts material (not to specify the configuration according to the sample delivery);
Inlet pressure (if inlet pressure >=0.6MPa, pump casing should equip with high strength material);
The shaft seal type (three are mechanical seal, injectable soft-fillings seal, special seal part, packing seal and so on, it will delivery packing seal if it does not indicate);
The bearing structure type (select according to medium temperature and so on, it will deliver standard fitting if it does not indicate);
Revolving direction of pump (view from the end of transmission, the revolving direction of pump is anticlockwise. It will deliver standard fitting if it does not indicate);
Motor rotational speed, power, voltage, protection rank, insulation grade, cooling method, whether to guard against explosions and so on;
Base: the sample 315 with the following common base frame sizes, frame sizes above 315 with a split base or no base, please specify when ordering;
For spare parts, please indicate the name and quantity of spare parts required;
Ordering, no special requirements to flanges book list data delivery, if any special requests when ordering;
State seal flushing method: wash the external and external washing. Add the rinse water temperature is suitable for <80 °C in water or medium instead of water occasions. For external washing of the water temperature >=80°C or media containing sand and other particles of the occasion;
Flat flange of the pump, with the sealing surface for sealing wire required the contract specified.
Selecting description:
The order of user isn't limited by the data which listed in the sample performance curve and performance parameter chart, this company may design and provide the products specially according to user's actual requirement flow and head;
If it is close to the listed performance parameter, it will prefer to select the standard impeller pump and the high speed pump generally (the premise is that satisfies the requirement of cavitation performance);
If user's required flow and head parameter aren't in the scope of product's large flow and low head operating condition, the matched motor power may confirm and reduce properly according to the actual operating condition point.
if you have special selecting or have the unclear place to the sample, please inquire the technical support department of Shanghai East Pump (Group) Co., Ltd directly.
Recommended spare parts: shaft, mechanical seal, seal ring, packing, bearings, impeller.
After service:
East Pump persist in "consumers' satisfaction" as our objective. "To offer consumers with high-class services" as our promises. They are embodied in our all processes of sales.
Before-sales service: Our engineers offer consumers design and consultation services. They will commend the optimum products, therefore, losses because of unsuitable select of pump can be averted.
Sales service: We follow the products sold on our own initiative. Consumers can receive our professional training free to ensure our products can operate with high efficiency to avoid equipment hitch owing to consumers' incorrect use.
After-sales service: Our service people will forwardly make selective-check for product sold termly. Furthermore, they will supervise consumers maintaining the equipment in time. Once our products work wrong, we will obviate the trouble as soon as possible, to make equipment operate normally.
Commitment to the service
1. After signing the contract , send engineer for assisting installation and debugging.
2. One-year warranty. Provide technical support free all-life of the products.
3. Keep all-life contacting with clients, get feedback on use of the equipment and make the products quality continually perfected.
4. Hot-line of service is available in 24h, responded in 8h. 400 1666 099
Welcom to visit our manufacture!
TEL:36044018
Audited Supplier 
){kind=link}
){kind=link}